Sea-Bird Electronics SBE 38 Bedienungsanleitung PDF herunterladen (Seite 59)

Manual revision 006 Section 4: Deploying and Operating SBE 19plus V2 SBE 19plus V2

Logging Commands (continued)

StartNow Start logging now.

StartDateTime=

mmddyyyyhhmmss Set delayed logging start month, day, year,

hour, minute, and second.

StartLater Start logging at time set with

StartDateTime=. If you need to change

19plus V2 setup after StartLater has been

sent (but before logging has started), send

Stop, change setup as desired, and then

send StartLater again.

Stop Stop logging or stop waiting to start

logging (if StartLater was sent

but logging has not begun yet).

Press Enter key before sending Stop.

Example: Program 19plus V2 to start logging on 20 January 2010

12:05:00. (user input in bold)

STARTDATETIME=01202010120500

STARTLATER

Notes:

• If using StartNow or StartLater to

start logging, the 19plus V2 must be

set to Moored mode (MM), or if in

Profiling mode (MP) must be set to

ignore the magnetic switch

(IgnoreSwitch=Y).

• After receiving StartLater, the

19plus V2 displays waiting to

start at . . . in reply to

GetSD or DS. Once logging starts,

the DS reply displays logging.

• If the delayed start date and time

has already passed when StartLater

is received, the 19plus V2 executes

StartNow.

• If the delayed start date and time is

more than 1 month in the future

when StartLater is received, the

19plus V2 assumes that the user

made an error in setting the delayed

start date and time, and it executes

StartNow.

Notes:

• You may need to send Stop several

times to get the 19plus V2 to

respond.

• If in Profiling mode and

IgnoreSwitch=N: Sending Stop

only stops logging briefly, and then

logging resumes. To stop logging,

slide the magnetic switch off or send

<CTRL Z>.

• You must stop logging before

uploading data.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Sea-Bird Electronics SBE 38 Bedienungsanleitung Seite 59

Kommentare zu diesen Handbüchern