Sea-Bird Electronics SBE 38 Bedienungsanleitung PDF herunterladen (Seite 122)

Manual revision 006 Appendix VI: Manual Revision History SBE 19plus V2

122

006

04/11

• Firmware 2.3:

Add compatibility with WET Labs RS-232 sensors (WetLabs=, TWetLabs).

Add commands for RS-232 sensor type and serial number (SetSerialType=, SetSerialSN=).

StartLater limitation is 1 month in future.

• Correct explanation of SampleNumber=; does not reset HeaderNumber=.

• Clarify use of DelayBeforeSampling=; applies to all auxiliary sensors except Optode.

• Clarify how to stop logging if in profiling mode and IgnoreSwitch=N; must use switch or send

<CTRL Z>; Stop command only stops logging briefly, and then logging resumes.

• Correct Digiquartz pressure sensor stability specification to 0.02% of full scale range/year.

• Clarify that in Moored mode, Optode data is acquired after all CTD and other external sensor

data.

• Replacement parts list: add ice cage, update Seaspares kit contents

• Update SeatermV2 screen.

• Remove references to Druck pressure sensors.

• Add information that Ni-Cad battery pack and charger no longer available.

•

Correct typos.

1 2 ... 117 118 119 120 121 122 123 124

Keine Kommentare

Sea-Bird Electronics SBE 38 Bedienungsanleitung Seite 122