Sea-Bird Electronics SBE 38 Bedienungsanleitung PDF herunterladen (Seite 26)

Manual revision 006 Section 3: Power and Communications Test SBE 19plus V2

Following is a description of the menus:

Description

Equivalent Command*

File

• Load command file – opens selected .XML

command file, and fills Send Commands

window with commands

• Unload command file – closes command

file, and removes commands from Send

Commands window

•

Exit - Exit program.

Communications

• Connect – connect to comm port

• Disconnect – disconnect from

comm port

• Configure – Establish communication

parameters (comm port and baud rate).

• Disconnect and reconnect – may be useful

if 19plus V2 has stopped responding

Command

• Abort – interrupt and stop 19plus V2’s

response

• Send 5 second break (not applicable to

19plus V2)

• Send stop command

• Set local time– Set date and time to time

sent by timekeeping software on your

computer; accuracy ± 25 msec of time

provided by computer.

• Set UTC Time (Greenwich Mean Time) –

Set date and time to time sent by

timekeeping software on your computer;

accuracy ± 25 msec of time provided

by computer.

• (press Esc key several

times for Abort)

• Stop

• DateTime=

Capture

Capture 19plus V2 responses on screen to

file, to save real-time data or use for

diagnostics. File has .cap extension.

Click Capture again to turn off capture.

Capture status displays in Status bar.

—

Upload

Upload data stored in memory, in format

Sea-Bird’s data processing software can use

(raw hex). Uploaded data has .xml

extension, and is then automatically

converted to a file with .hex extension.

Before using Upload: stop logging by

sending Stop.

Several status commands

and appropriate data

upload command as

applicable to user

selection of range of data

to upload (use Upload

menu if you will be

processing data with

SBE Data Processing or

viewing archived data

with Seasave)

Tools

• Diagnostics log - Keep a diagnostics log.

• Convert .XML data file – Using Upload

menu automatically does this conversion;

tool is available if there was a problem

with the automatic conversion.

• Send script – Send XML script to 19plus

V2. May be useful if you have a number of

19plus V2s to program with same setup.

*See Command Descriptions in Section 4: Deploying and Operating

SBE 19plus V2.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Sea-Bird Electronics SBE 38 Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern