Sea-Bird Electronics SBE 38 Bedienungsanleitung PDF herunterladen (Seite 42)

Manual revision 006 Section 4: Deploying and Operating SBE 19plus V2 SBE 19plus V2

Status Commands (continued)

GetCC Get and display calibration coefficients,

which are initially factory-set and should

agree with Calibration Certificates shipped

with 19plus V2.

Example: 19plus V2 with strain-gauge pressure sensor (user input in bold, command used to modify coefficient in parentheses)

getcc

<CalDate>19-Mar-11</CalDate> [TCalDate=]

<TA0>1.155787e-03</TA0> [TA0=]

<TA1>2.725208e-04</TA1> [TA1=]

<TA2>-7.526811e-07</TA2> [TA2=]

<TA3>1.716270e-07</TA3> [TA3=]

<TOFFSET>0.000000e+00</TOFFSET> [TOffset=]

</Calibration>

<CalDate>19-Mar-11</CalDate> [CCalDate=]

<G>-1.006192e+00</G> [CG=]

<H>1.310565e-01</H> [CH=]

<I>-2.437852e-04</I> [CI=]

<J>3.490353e-05</J> [CJ=]

<CPCOR>-9.570000e-08</CPCOR> [CPCor=]

<CTCOR>3.250000e-06</CTCOR> [CTCor=]

<CSLOPE>1.000000e+00</CSLOPE> [CSlope=]

</Calibration>

<CalDate>07-Mar-11</CalDate> [PCalDate=]

<PA0>-5.137085e-02</PA0> [PA0=]

<PA1>1.550601e-03</PA1> [PA1=]

<PA2>7.210415e-12</PA2> [PA2=]

<PTCA0>5.154159e+05</PTCA0> [PTCA0=]

<PTCA1>2.560262e-01</PTCA1> [PTCA1=]

<PTCA2>-8.533080e-02</PTCA2> [PTCA2=]

<PTCB0>2.426612e+01</PTCB0> [PTCB0=]

<PTCB1>-7.750000e-04</PTCB1> [PTCB1=]

<PTCB2>0.000000e+00</PTCB2> [PTCB2=]

<PTEMPA0>-7.667877e+01</PTEMPA0> [PTempA0=]

<PTEMPA1>4.880376e+01</PTEMPA1> [PTempA1=]

<PTEMPA2>-4.555938e-01</PTEMPA2> [PTempA2=]

<POFFSET>0.000000e+00</POFFSET> [POffset= (decibars)]

<PRANGE>1.000000e+03</PRANGE> [PRange= (psia)]

</Calibration>

<OFFSET>0.000000e+00</OFFSET> [VOffset0=]

<SLOPE>1.260977e+00</SLOPE> [VSlope0=]

</Calibration>

<OFFSET>-4.728750e-02</OFFSET> [Voffset1=]

<SLOPE>1.259474e+00</SLOPE> [VSlope1=]

</Calibration>

<OFFSET>-4.715313e-02</OFFSET> [Voffset2=]

<SLOPE>1.259946e+00</SLOPE> [VSlope2=]

</Calibration>

<OFFSET>-4.772396e-02</OFFSET> [Voffset3=]

<SLOPE>1.260486e+00</SLOPE> [VSlope3=]

</Calibration>

<OFFSET>-4.765417e-02</OFFSET> [Voffset4=]

<SLOPE>1.260014e+00</SLOPE> [VSlope4=]

</Calibration>

<OFFSET>-4.744167e-02</OFFSET> [Voffset5=]

<SLOPE>1.260255e+00</SLOPE> [VSlope5=]

</Calibration>

<EXTFREQSF>1.000000e+00</EXTFREQSF> [ExtFreqSF=]

</Calibration>

</CalibrationCoefficients>

Notes:

• DCal and GetCC responses contain

similar information, but in different

formats.

• Dates shown are when calibrations

were performed.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Sea-Bird Electronics SBE 38 Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern