Sea-Bird Electronics SBE 38 Bedienungsanleitung PDF herunterladen (Seite 94)

ISO 9002 CERTIFIED

Sud-Chemie Performance

Packaging

101 Christine Dr.

Belen, New Mexico 87002

Phone: (505) 864-6691

Fax: (505) 864-9296

MATERIAL SAFETY DATA SHEET – August 13, 2002

SORB-IT

Packaged Desiccant

NOTE TO PHYSICIAN: This product is a desiccant and generates heat as it adsorbs

water. The used product can contain material of hazardous nature. Identify that material

and treat accordingly.

SECTION VI -- REACTIVITY DATA

Reactivity - Silica gel is stable under normal temperatures and pressures in sealed

containers. Moisture can cause a rise in temperature which may result in a burn.

SECTION VII --SPILL OR LEAK PROCEDURES

Notify safety personnel of spills or leaks. Clean-up personnel need protection against

inhalation of dusts or fumes. Eye protection is required. Vacuuming and/or wet methods

of cleanup are preferred. Place in appropriate containers for disposal, keeping airborne

particulates at a minimum.

SECTION VIII -- SPECIAL PROTECTION INFORMATION

Respiratory Protection - Provide a NIOSH/MSHA jointly approved respirator in the

absence of proper environmental control. Contact your safety equipment supplier for

proper mask type.

Ventilation - Provide general and/or local exhaust ventilation to keep exposures below

the TLV. Ventilation used must be designed to prevent spots of dust accumulation or

recycling of dusts.

Protective Clothing - Wear protective clothing, including long sleeves and gloves, to

prevent repeated or prolonged skin contact.

Eye Protection - Chemical splash goggles designed in compliance with OSHA

regulations are recommended. Consult your safety equipment supplier.

SECTION IX -- SPECIAL PRECAUTIONS

Avoid breathing dust and prolonged contact with skin. Silica gel dust causes eye irritation

and breathing dust may be harmful.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 103 104

Keine Kommentare

Sea-Bird Electronics SBE 38 Bedienungsanleitung Seite 94