Sea-Bird Electronics SBE 38 Bedienungsanleitung PDF herunterladen (Seite 40)

Section 4: Setting Up MicroTSG SBE 45

Data Output Format

Each scan ends with a carriage return <CR> and line feed <LF>. Leading

zeros are suppressed, except for one zero to the left of the decimal point.

All data is separated with a comma and a space, except as noted.

The converted output data format is:

• If OutputFormat=0 (default):

ttt.tttt, cc.ccccc, sss.ssss, vvvv.vvv

• If OutputFormat=1:

ttt.tttt,cc.ccccc, sss.ssss, vvvv.vvv

• If OutputFormat=2:

ttt.tttt, sss.ssss, cc.ccccc, vvvv.vvv

Note: OutputFormat=2 is not compatible with Seasave, SBE Data

Processing, or the optional Interface Box.

where

t = temperature (degrees Celsius, ITS-90)

c = conductivity (S/m); data sent only if OutputCond=Y

s = salinity (psu); data sent only if OutputSal=Y

v = sound velocity (meters/second), calculated by Chen-Millero

(if SVAlgorithm=C) or Wilson (if SVAlgorithm=W) equation;

data sent only if OutputSV=Y

Example 1: Sample data output when OutputFormat=0,

OutputCond=Y, OutputSal=N, and OutputSV=N:

23.7658, 0.00019

(temperature, conductivity)

Example 2: Sample data output when OutputFormat=1,

OutputCond=Y, OutputSal=N, and OutputSV=N:

23.7658,0.00019

(temperature,conductivity)

Notes:

• For OutputFormat=1, the space

before the conductivity output is

eliminated. The remainder of the

data format is unchanged from

OutputFormat=0.

• Seasave, SBE Data Processing,

and the optional Interface Box

are all compatible with any

combination of output

parameters, if OutputFormat=0

or 1.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 103 104

Keine Kommentare

Sea-Bird Electronics SBE 38 Bedienungsanleitung Seite 40